indonsa.blogg.se - Cisco virtual controller free

Redundancy Port (RP): This port is used to connect another controller for redundant operations.If you want to configure the controller with GUI you need to connect your computer with service port. Service Port (SP): Used for initial boot function, system recovery and out of band management.

The following are the most important Controller physical Ports. When you connect to one console port, the other is disabled.Ĭontroller Ports are the physical ports of the device as shown on picture above. You can use only one console port (either RJ-45 or mini USB). Power supply (PS1 and PS2), System (SYS), and Alarm (ALM) LEDs SFP distribution port Link and Activity LEDs

A Lightweight AP cannot operate on its own.īefore jumping into the configuration, let’s talk a little bit about Wireless LAN Controller Ports, Controller Interfaces and CAPWAP protocol. All the management functions are usually performed on a wireless LAN controller. A lightweight access point performs only the real-time 802.11 operation.

Centralized WiFi Architecture: In Centralized Architecture the access points are controlled and managed by a central device called Wireless LAN Controller (WLC) and such APs are called Lightweight APs.

In this Architecture an autonomous Access Point performs both 802.11 operations and management operations. Autonomous APs work individually and have to be configured and managed one by one.

Distributed WiFi Architecture: In Distributed Architecture all the WiFi Access Points (APs) are self-contained and called autonomous or standalone APs.

Before going forward, let’s first see some basics about the product and the wlan technology from Cisco: IntroductionĬisco introduced two types of Wireless architectures in its WiFi portfolio: In this article we will go through a basic step-by-step configuration of a Cisco Wireless LAN Controller.